Hz100W 400-700MHz /700-1050MHz Dds Source Drone Jammer Anti Fpv Module

• Customization: Available
• Frequency Range: 400-700MHz/700-1050MHz
• Application: Drone Jammer
• Model NO.: HZ100W400-700mhz
• Sample Leadtime: 10days
• Lace of Origin: Guangdong, China
• Description: Jammer Signal Blocker
• Manufacturing Date Code: 20240301
• Selling Units: Single Item
• Manufacturina Date Code: 20240301
• Custom: Customizable
• Mounting Type: Screw Fixing
• Series: Rsf
• Single Gross Weight: 1.030kg
• Features: Hight Power
• Single Package Size: 20X15X2cm
• Production Capability: 5000PCS Per Month
• Power: 100W
• Trademark: RF Skypower
• Production Capacity: 10000

Product Description

 

Product Description

Item	Indicator requirements	remarks
Frequency (Mhz)	400~700MHz
Signal mode	DDS
Saturated Output Power	50 ± 1dBm
Large Signal Gain	50±1dB
Gain Flatness	≤4.0dB
Gain Stability	± 1.5dB	at -25ºC~+55ºC
Power stability	± 1.5dB	at -25ºC~+55ºC
DC Input Voltage	DC28±1.0V
Current Consumption	10.5A typ; 12.5A max	@ Pout=100W CW, 50 ohms load
Monitoring interface	7W2 Connector: A1: GND; A2: +28V; PIN1: RS485A; PIN2: RS485B; PIN3: GND; PIN4: NC; PIN5: Power amplifier enable switch,High level +5V off, low level 0V on.
Monitoring type	RS485,Baud rate 19200
Monitoring function	1. Power amplifier query:module status (including power amplifier status, over temperature alarm, standing wave ratio alarm, power amplifier fault alarm); 2. Power amplifier enable switch: Turn on or off the power amplifier. 3. Over temperature alarm: The temperature threshold is +85ºC. If the detected temperature exceeds +85ºC, an alarm will be triggered, and the power amplifier will be turned off. When it reaches +65ºC, the power amplifier will be turned on; 4. Power amplifier standing wave alarm:When the power amplifier standing wave detection is greater than 4.0, the power amplifier starts protection; 5. Overvoltage alarm of power amplifier:When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is below 24V, the power amplifier will automatically shut down
RF output connector	N-K
Dimension	200×120×24mm
Installation Dimension	194×114×24mm
Screw Size	4-Ø4.2mm

 

Item	Indicator requirements	remarks
Frequency (Mhz)	700~1050MHz
Bandwidth rang (Mhz)	350M
Maximum output power (dBm)	50 ± 1dBm
Large Signal Gain	50±1dB
Gain Flatness	≤3.0dB
Gain Stability	± 1.5dB	at -25ºC~+55ºC
Power stability	± 1.5dB	at -25ºC~+55ºC
DC Input Voltage	DC28±1.0V
Current Consumption	10.5A typ; 12.5A max	@ Pout=100W CW, 50 ohms load
Monitoring interface	7W2 Connector: A1: GND; A2: +28V; PIN1: RS485A; PIN2: RS485B; PIN3: GND; PIN4: NC; PIN5: Power amplifier enable switch,High level +5V off, low level 0V on.
LTD pilot lamp	POWER:Power Supply pilot lamp; RUN:Run pilot lamp; ALARM:Fault alarm pilot lamp.
Monitoring type	RS485,Baud rate 19200
Monitoring function	1. Power amplifier query:module status (including power amplifier status, over temperature alarm, standing wave ratio alarm, power amplifier fault alarm); 2. Power amplifier enable switch: Turn on or off the power amplifier. 3. Over temperature alarm: The temperature threshold is +85ºC. If the detected temperature exceeds +85ºC, an alarm will be triggered, and the power amplifier will be turned off. When it reaches +65ºC, the power amplifier will be turned on; 4. Power amplifier standing wave alarm:When the power amplifier standing wave detection is greater than 4.0, the power amplifier starts protection; 5. Overvoltage alarm of power amplifier:When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is below 24V, the power amplifier will automatically shut down
RF output connector	N-K
Dimension	170×79.5×24mm
Installation Dimension	164×73.5×24mm
Screw Size	4-Ø3.2mm

Company Profile

Why Choose Us

ODM&ODM

FAQ