| Customization: | Available |
|---|---|
| Frequency Range: | 400-700MHz |
| Application: | Anti Drone Jammer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Item
|
Specification
|
Remarks
|
|
Frequency Range
|
400-700MHz
|
|
|
Saturated Output Power
|
43±1dB
|
|
|
Large Signal Gain
|
43±1dB
|
|
|
Gain Flatness
|
≤3.0dB
|
|
|
Gain Stability
|
±1.5dBm
|
at -25+55
|
|
Power stability
|
±1.5dBm
|
at -25+55
|
|
DC Input Voltage
|
DC28±1.0V
|
|
|
Current Consumption
|
3.0Atyp; 4.0A max |
@ Pout=20W CW, 50 ohms load
|
|
Working Temperature
|
-25+55
|
|
|
Monitoring interface
|
PHD2.0MM-2*3PIN Socket, PIN1: RS485A; PIN2: RS485B; PIN3: GND; PIN4,PIN5,PIN6: NC; PIN6: Power amplifier enable switch,High level +5V off, low level 0V on. |
|
|
LTD pilot lamp
|
POWERPower Supply pilot lamp RUNRun pilot lamp ALARMFault alarm pilot lamp |
|
|
Monitoring type
|
RS485Baud rate 19200
|
|
|
Monitoring function
|
1. Power amplifier query:module status (including power amplifier status, over temperature alarm, standing wave ratio alarm, power amplifier fault alarm); 2. Power amplifier enable switch: Turn on or off the power amplifier. 3. Over temperature alarm: The temperature threshold is +85. If the detected temperature exceeds +85, an alarm will be triggered, and the power amplifier will be turned off. When it reaches +65, the power amplifier will be turned on; 4. Power amplifier standing wave alarm:When the power amplifier standing wave detection is greater than 4.0, the power amplifier starts protection; 5. Overvoltage alarm of power amplifier:When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is below 24V, the power amplifier will automatically shut down |
|
|
RF output connector
|
SMA-KFD
|
|
|
Dimension
|
150×79.5×20mm
|
|
|
Installation Dimension
|
144×73.5×20mm
|
|
|
Screw Size
|
4-Ø3.2mm
|
|
){kind=link}