| Customization: | Available |
|---|---|
| Frequency Range: | 700-1050MHz |
| Application: | Anti Drone Jammer |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency

Parameter | Specification | Remark |
Frequency Range | 700-1050MHz | |
Signal Bandwidth | 350MHz | DDS |
Saturated Output Power | 43±1dB | |
Large Signal Gain | 43±1dB | |
Gain Flatness | ≤3.0dB | |
Gain Stability | ±1.5dBm | at -25~+55 |
Power stability | ±1.5dBm | at -25~+55 |
DC Input Voltage | DC28±1.0V | |
Current Consumption | 3.0Atyp; 4.0A max. | @ Pout=20W CW, 50ohms load |
Working Temperature | -25+55 | |
Monitoring interface | PHD2.0MM-2*3PIN Socket, PIN1: RS485A; PIN2: RS485B; PIN3: GND; PIN4,PIN5,PIN6: NC; PIN6: Power amplifier enable switch,High level +5V off, low level 0V on | |
LTD pilot lamp | POWERPower Supply pilot lamp RUNRun pilot lamp ALARMFault alarm pilot lamp | |
Monitoring type | RS485Baud rate 19200 | |
Monitoring function | 1. Power amplifier query:module status (including power amplifier status, over temperature alarm, standing wave ratio alarm, power amplifier fault alarm); 2. Power amplifier enable switch: Turn on or off the power amplifier. 3. Over temperature alarm: The temperature threshold is +85. If the detected temperature exceeds +85, an alarm will be triggered, and the power amplifier will be turned off. When it reaches +65, the power amplifier will be turned on; | |
4. Power amplifier standing wave alarm:When the power amplifier standing wave detection is greater than 4.0, the power amplifier starts protection; 5. Overvoltage alarm of power amplifier:When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is below 24V, the power amplifier will automatically shut down | ||
RF output connector | SMA-KFD | |
Dimension | 150×79.5×20mm | |
Installation Dimension | 144×73.5×20mm | |
Screw Size | 4-Ø3.2mm |














