| Customization: | Available |
|---|---|
| Frequency Range: | 30-512MHz |
| Frequency: | 30-512MHz |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Parameter | Min | Typ | Max | Unit | Test Condition |
Operating frequency | 30 | 512 | MHz | ||
Instant bandwidth | 200 | MHZ | Broadband signal,such asOFDM signal | ||
Output power | 158 | 200 | W | CW signal | |
Gain | dB | Measured with VNA in swept frequency mode at -20dBm. Input power calibrated/measured at the amplifier input port. | |||
Gain flatness | -4 | 4 | dB | Test condition the same as Gain | |
Input VSWR | 1.8 | Measured with VNA in swept frequency mode at -20dBm. Input power calibrated/measured at the amplifier input port. | |||
Spurious | -60 | dBc | CW signal at the output power of 200W. Spurious defined as any non-harmonic amplifier output. Spurious measured in a 1kHz resolution bandwidth, 10kHz video bandwidth.Specifications apply at offsets of greater than or equal to ±10kHz from the RF carrier. Maximum measurement frequency is 8GHz | ||
Harmonics | -10 | dBc | CW signal source at output power of 200W | ||
Operating voltage | 24 | 28 | 32 | V | Note:Output power capabilities and gain will vary with voltage |
Operating current | 29 | 36 | A | CW signal source at output power of 200W |
Parameter | Min | Typ | Max | Unit |
Operating temperature | -40 | +60 | ℃ | |
Storage temperature | -55 | +85 | ℃ | |
Relative Humidity (non-condensing) | +95 | % | ||
Dimension | 200 x 158x 25mm | |||
Weight | 1.4kg | |||
RF Connectors In/Out | Input: SMA-F Output: N-F | |||
Control Connector | D-Sub 15-Pin Female | |||
Power Supply Connector | Pull-core Capacitance | |||
Cooling | External Heat sink | |||