Customization: | Available |
---|---|
Frequency Range: | 700-1050MHz |
Application: | Anti Drone Jammer |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item
|
Specification
|
Remarks
|
|
Frequency Range
|
7001050MHz
|
|
|
Signal Bandwidth
|
350MHz
|
VCO
|
|
Saturated Output Power
|
43±1dB
|
|
|
Large Signal Gain
|
43±1dB
|
|
|
Gain Flatness
|
≤3.0dB
|
|
|
Gain Stability
|
±1.5dBm
|
at -25+55
|
|
Power stability
|
±1.5dBm
|
at -25+55
|
|
Output VSWR
|
≤1.5
|
|
|
DC Input Voltage
|
DC28±1.0V
|
|
|
Current Consumption
|
2.8A typ;
3.8A max |
@ Pout=20W CW, 50 ohms load
|
|
Working Temperature
|
-25+55
|
|
|
Monitoring interface
|
PHD2.0MM-2*3PIN Socket:
PIN1-RS485APIN2-RS485BPIN3-GND PIN4,PIN5-NC, PIN6-Enable switch,Enable = 0V, Disable = 5V |
|
|
LTD pilot lamp
|
POWERPower Supply pilot lamp RUNRun pilot lamp ALARMFault alarm pilot lamp
|
|
|
Monitoring type
|
RS485Baud rate 19200
|
|
|
Monitoring function
|
1. Power amplifier query:module status (including power amplifier status, over temperature alarm, standing wave ratio alarm, power
amplifier fault alarm); 2. Power amplifier enable switch: Turn on or off the power amplifier. 3. Over temperature alarm: The temperature threshold is +85. If the detected temperature exceeds +85, an alarm will be triggered, and the power amplifier will be turned off. When it reaches +65, the power amplifier will be turned on; 4. Power amplifier standing wave alarm:When the power amplifier standing wave detection is greater than 4.0, the power amplifier starts protection; 5. Overvoltage alarm of power amplifier:When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is below 24V, the power amplifier will automatically shut down |
|
|
RF output connector
|
SMA-KFD
|
|
|
Dimension
|
128×65×20mm
|
|
|
Installation Dimension
|
122×59×20mm
|
|
|
Screw Size
|
4-Ø3.2mm
|
|